30% off a clean bum experience today!

The 3-Minute Installation Video

3-Minute Installation Video Thumb for Desktop 3-Minute Installation Video Thumb for Mobile
Watch The Video
Easy Installation

Bidet installation made simple. You'll be washing in no time.

The 4-Step Installation Guide

Step 11
Step 22
Step 33
Step 44

Prep your toilet:

Installing your Element has just a few steps! Follow along with your provided manual to ensure a quick process. Remove your existing toilet seat, then turn off the shut off valve and drain the tank by flushing the toilet. Disconnect the water supply hose from the toilet tank fill valve.

Tip: You may need a wrench to disconnect the water supply hose. Use a container or towel to catch any excess water.

Install your T-valve:

Connect your T-valve to the toilet tank fill valve, then reconnect the water supply hose to the bottom of the T-valve and connect one end of the bidet hose to the open side of the T-valve.

Tip: Use the provided thread tape to create a watertight seal on all thread connections, and hand-tighten everything to avoid stripping the connection threads.

Install your Element:

Place your Element on the back of the toilet so the nozzles are centered in the bowl then line up the adjustable brackets with the bolt holes. Place your toilet seat on top of your Element and secure it using the original hardware. Connect the open end of the bidet hose to the water inlet on the underside of the control panel.

Final checks and steps:

Check that connections are properly secured, slowly turn on the shut off valve while checking for leaks.


For a full list of detailed instructions, please consult your user manual or visit our Help Center.

Help Center